Owners manual

Front Panel Operation

Mode Select Input SwapLCD Screen HDMI/VGA Input Select

The front-panel of KD-MLV4x2Pro features 3 sets of buttons:

HDMI / VGA input-type select (2 buttons)

› Enables selection of the HDMI digital video input or VGA analog video input for the speciﬁed

source

» Note: Selection of VGA or Component video input type for the Analog Video input must be

done by RS-232 or TCP-IP

› To select HDMI or VGA input type:

» 1. Press either HDMI or VGA, as desired

» 2. Using the Output 1 row of buttons, press the desired input number that you’d like to

apply the setting to

» 3. Conﬁrmation of your selection is shown on the LCD screen

» a. Example: When input 1 input-type has been set to VGA, the LCD screen will show

[A/V SOURCE ] INPUT 1 = VGA

Matrix switching source select (2 rows of 6 buttons)

› Enables selection of any input source (1-4) for the respective output, or to enter 4K Quadrant or

2K Quadrant modes

» 2K QV mode divides the image into 4 equally-sized quadrants

» 4K QV mode divides the image into 4 equally-sized quadrants

» The overall image is 4K, making each quadrant a full-1080p resolution

› The selected source is indicated by a blue ﬁll of the respective button

› If any 4K or 2K QV quadrant modes are chosen, the Matrix switching source select buttons will

not be illuminated for the respective output

› Conﬁrmation of your matrix switching selection and respective input-type for selected source is

shown (in parenthesis) on the LCD screen:

» OUT 1: IN 1 (HDMI)

» OUT 2: IN 2 (VGA)

› Conﬁrmation of 4K quadrant mode and respective input-type for sources (in parenthesis) is shown

on the LCD screen:

» OUT 1: 4K QV (HVHH)

» OUT 2: IN 2 (VGA)