Manualshelf

Specification Sheet

ManualsBrandsKey Digital ManualsHome Theater Networking4K UHD AV Over IP Encoder - Black metal
89909192939495969798
97 | P a g e
Back to top
6. Enable IGMP Snooping. Check “Snooping Enabled” and verify that “Fast Leave” is also enabled. Uncheck
“Unregister IPMCv4 Flooding enabled”
a. The path is: Configuration -> IPMC -> IGMP -> Basic Configuration
7. Create an IGMP VLAN. The ID should be set to 1. Force IGMPV2 compatibility for this VLAN. Ensure the
configuration is as below:
a. The path is: Configuration -> IPMC -> IGMP -> VLAN Configuration
8. Reboot the network switch and verify that the settings are correct. The switch is now ready for the KD-IP922
system.
a. There is no need to save the running configuration of this network switch. The settings will persist
on system reboot.