Specification Sheet

64 | P a g e
Back to top
Luxul AMS-4424P
Network Setup Guide for KD-IP822, KD-IP922, KD-IP1022, KD-IP1080
Important Notes:
• Please use firmware v.4.0.8.1. Other firmware versions are not compatible.
• Verified for single switch use only. Stacking switches may cause compatibility issues.
1. Login to the switch:
a. Plug an Ethernet cable into any of the ports of the switch
b. Plug the other end into the Ethernet port of your computer
c. Power on the Switch
d. Check to see that the IP address of the computer is within this network Subnet :
192.168.0.xxx (“xxx” ranges 1~254). For example, 192.168.0.100
2. Open the Web browser, and enter 192.168.0.4 (default IP address of Luxul AMS-4424P). The login
window appears as below: