Quick Start Guide

ManualsBrandsKey Digital ManualsHome Theater Networking4K UHD AV Over IP Encoder - Black metal

Key Features

› Enterprise AV

™

Over IP: Utilizes a managed gigabit network switch to enable video distribution, matrix

switching, and extension

› Inter-System Compatibility: Fully compatible with KD-IP922ENC and DEC units / systems

› Video Wall Processing: Encoder + Decoder systems create video walls with up to 4 total displays.

Use KD-IP922DEC for larger video wall conﬁgurations

› Control: 2 multi-function ports may be used as third-party control interface, Compass Control

Pro

master controller, control extension via IP, or callable via KeyCode open API

› Key Digital® App Ready: Network scan & detect populates pre-built GUI including image preview

› HDCP 2.2: Compliancy up to HDCP 2.2 and backward compliant

› 4K/Ultra HD Resolution: Support for 4096x2160 or 3840x2160 24/25/30Hz at 4:4:4/8 Bit or

60Hz at 4:2:0/8 Bit

› 4K Down-scale: Incoming 4K resolution can be down-converted to 1080p or 720p

at each decoder,

enabling monitors to display content at optimal resolution at all times

› Signal Extension: Up to 330 ft. / 100 m @ 4K 24/25/30(4:4:4)/60(4:2:0) into network switch or or

point-to-point

› Power over Ethernet:

Does not require power supply when integrated with compatible PoE network switch

› Redundant Power Connection: Added reliability for non-PoE integration.

Power supply sold separately

› Data Stream Bandwidth: < 900Mbps

› Latency: <40ms at 4K. Less at lower resolution.

› Installation: Use KD-SMS16 to cleanly install up to twelve KD-IP822ENC/DEC units in rack

› HDMI

and HDCP Licensing: Fully licensed and compatible with HDCP 2.2 and HDMI latest

technology such as 4K/UHD 4:2:0/8bit at 60 f/s

› EDID Control: Internal library features 15 default EDID conﬁgurations and native EDID data from

Output/Display devices connected to Decoder

› Hot Plug Detection Control: Enables integrator to choose if active signal voltage is forced to

connected input devices

› Full Buffer System

™

: Manages TMDS re-clocking / signal re-generation, HDCP authentication with

source & display, EDID Control handshake, and Hot Plug control

› IR Sensor: Sensor powering via +5V IR In port collects line-of-sight IR from remote(s) without external

IR connecting block

› Up/Down IR:

Two channels of IR enable control to/from devices connected to Encoder and Decoder units

› RS-232: Bi-Directional control to/from Encoder and Decoder unit on Phoenix connector

› RS-232/TCP-IP Control Mode: Provides control of unit as well as connectivity status

› Lossless compressed digital audio: Support for Dolby

TrueHD, Dolby

Digital Plus, Dolby Atmos

and DTS-HD Master Audio

™

› Control System Support: Controllable by all IR, RS-232 & TCP/IP supported control systems via open

API: Compass Control

Pro, AMX

, Control4

, Crestron

, KNX

, RTI

, Savant, URC

, Leviton

etc.