Quick Start Guide

7
CONFIGURE
Use Key Digital Management Software
™
Pro (KDMS
™
Pro)
1. Connect your Presentation Switcher to your PC via the front USB
2. Press SCAN ➔ USB DEVICE,
and select the Presentation Switcher
found in the Device’s window
3. In the Properties window, scroll down to the Video/Audio Settings section
and use the CAMUSB Control dropdown
to select the amount of
KD-CAMUSBs integrated with your Key Digital Presentation Switch Control
checkbox, then press APPLY
CONTROL
4. In KDMS
™
Pro, select the Camera tab
to enter the camera
controls page
5. For iOS control, download the Key Digital App.
6. With the iOS device on the same network as the Presentation Switcher,
open the KD-App, and press DEVICES to perform a network scan
for your system.
7. Once the system has been detected, you may enter the control page and
choose the Camera tab to enter the camera controls page
Key Digital
®
App
on the App Store
KDMS
™
Pro
Download Page
KDMS
™
Download Page
Key Digital
®
App
on the App Store
KDMS
™
Pro
Download Page
KDMS
™
Download Page