Owner's Manual

Handheld transmitter functions
page 7 of 8
PROBLEM SOLUTION
The controller doesn’t react
to transmitter commands
• Check the battery of the hand-
held transmitter
• The transmitter is not paired-
correctly with the controller.
Repeat the pairing process
• Reduce the distance between
handheld transmitter and PL-
REM-200 and/or remove ob-
stacles
The pool lights don’t work
• Check the green status LED
• Check if there is 12VAC output
at the terminals of the controller
• Check the fuse of the controller
Troubleshooting
Toggle Output A ON/OFF
Toggle Output B ON/OFF
Toggle the lamps ON/OFF
Go to next color scenario
Replacing transmitter battery
• Remove the philips head screw and open the transmitter
• Replace the battery, respecting the polarity
Battery type: A23 12V
-
+
If the fuse is ok, and there is still no
12VACoutput, contact your distributor