Tus neeg siv phau ntawv
CLIFC-W 2015-05 Clima Flex Wall Mounted FCU (S type panel)
37
Press this button, timer on function is active. Then every press, the time increase 0.5h, after 10h, 1h
increasement after each press. If cancel this Function, just set it to "0.0”.
3、Timer off button:
Press this button, timer off function is active.Then every press, the time increase 0.5h, after 10h, 1h
increasement after each press. If cancel this function, just set it to “0.0”.
4、Follow me button:
When under cool, heat and auto mode, and press this button, follow me function is active. Press again,
this function is ineffective.
5、Electrical heater button :
If press this button in heat mode, electrical heater function become ineffective.
6、Reset button(hidden):
Use a 1mm stick to press in the little hole, then the current setting is canceled. The wire controller enters
into original state.
7、ON/OFF button:
When in off state, press this button, the indicator is on, the wire controller enter into on state, and send
setting information to in door Pcb. When in on state, press this button, the indicator is off, and send
instruction. If timer on or timer off has been set, it concel this setting then send instruction to stop the
machine.
8、Adjust button ▲:
Set indoor temperature up. If press and hold on, it will increase at 1°C (2°F) per 0.5 second.
9、Adjust button ▼ :
Set indoor temperature down. If press and hold on, it will decrease at 1°C (2°F) per 0.5 second.
10、Swing button:
First press “start swing function”; second press “stop swing”. (Match to some model with swing function).
11、Economy operation button:
Press this button, the indoor unit operates in economy mode, press again, exit this mode (it may be
ineffective for some models)
12、Fan speed button:
Press this button consecutively; the fan speed will circle as follow:
13、Lock button(hidden):
When you push the LOCK button, all current settings are locked in and the wire controller does not
accept any operation except that of the LOCK button. Use the lock mode when you want to prevent
setting from being changed accidentally or play fully. Push the LOCK button again when you want to
cancel the LOCK mode.
Installation
Wiring Principle Sketch: