Tus neeg siv phau ntawv

CLIFC-W 2015-05 Clima Flex Wall Mounted FCU (S type panel)
31
Conditioner when in DRY mode will automatically operate many times without running the COOL and FAN
mode.
13.1.5.5 Time Operation
PUSH TIMER button to set the on and off times of the unit.
1. To set the STARTING time.
1.1 Please push the CANCEL button to cancel any former settings.
1.2 Push the TIMER button. The remote controller will show the TIMER and the signal "h" is shown on the
display panel. The control is now ready to reset the TIMER ON to start the operation.
1.3 Push the TEMP button ( or ) to set desired unit START time .
1.4 After setting the TIMER there will be a one-half second delay before the remote controller transmits the
signal to the Air Conditioner. Then, after approximately another 2 seconds, the set temperature will
re-appear on the digital display.
2. To set the STOPPING time.
2.1 Please press the CANCEL button to cancel any former settings.
2.2 Push the TIMER button and the remote controller will show the last set time for the START operation
and the signal "h" will be shown on the display panel. You are now ready to re-adjust the TIMER OFF to
stop the operation.
2.3 Push the TEMP button to cancel the TIMER ON setting. The digital area will show "00".
2.4 Push the TIMER button and the remote controller will show the last set time for the STOP operation and
the signal "h" will be shown on the display panel. You are now ready to reset the time of the STOP
operation.
2.5 Push the TEMP button ( or ) to set the time you want to stop the operation.
2.6 After setting the TIMER there will be a one-half second delay before the remote controller transmits the
signals to the Air Conditioner. Then after approximately another 2 seconds, the set temperature will
re-appear on the digital display.
3. Set the STARTING & STOPPING time
3.1 Please press the CANCEL button to cancel any former settings.
3.2 Push the TIMER button and the remote controller will show the last setting time for START operation
and the signal "h" will be shown on the display panel. You are now ready to readjust the TIMER ON to
start the operation.
3.3 Push the TEMP button ( or ) to set the time you want to start the operation.
3.4 Push the TIMER button and the remote controller will show the last set time for STOP operation and the
signal "h" will be shown on the display panel. You are now ready to reset the time of the STOP operation.
3.5 Push the TEMP button ( or ) to set the time you want to stop the operation.
3.6 After setting the TIMER there will be a one-half second delay before the remote controller transmits the
signal to the Air Conditioner. Then, after approximately another 2 seconds ,the set temperature will
re-appear on the digital display.
Note :
1. Please reset the TIMER after cancelling the former time settings.
2. The setting time is relative time. That is the time set is based on the delay of the current time.