Tus neeg siv phau ntawv

Clima Flex Wall Mounted FCU (S type panel) CLIFC-W 2015-05
22
12.5 Water pipe installation
Connection of the water pipe should be done by professionals. Double-span should be used when
connecting pipes of Indoor Unit.
 At the first debugging, completely expel air from coils via expelling valve.
12.6 Wiring chart
The wiring diagram please refers to chapter 8.
Cautions:
 The reserved function is indicated in broken line table, users can select it when necessary.
 An all-pole disconnection device which has at least 3mm separation distance in all pole and a residual
current device (RCD) with the rating of above 10mA shall be incorporated in the fixed wiring according
to the national rule.
 The appliance shall be installed in accordance with national wiring regulations.
Take out the faceplate, and then dismantle the display cover
Individual connect the power cord and signal line, adjust the dial switch.
12.6.1 Terminal Board Diagram
Note: The air-conditioners can connect with Central Control Monitor (CCM). Before operation, please wiring
3-way valve
(4.ports)
discharge
valve
conector
display cover plate
the wire holder of power
cord(three-position)
the wire holder of signal line
(five-position)
display cover plate
dial switch