Daim Ntawv Qhia Tus Neeg Siv

6
Installation (continued)
4
Installing the xture
Push the spring-loaded clips on the xture (A) upward and
insert the xture (A) into the mounting hole. Release the
clips. The xture (A) will be pulled ush to the ceiling.
For airtight installations, install the foam gasket (B)
between the xture (A) and the ceiling.
A
B
A
Care and Cleaning
To clean the xture, rst disconnect the power to the xture by turning off the circuit breaker of by removing the fuse at the fuse box.
Use a dry or slightly dampened, clean cloth (use clean water, never use a solvent) to wipe the surface of the xture.
Allow the xture to dry completely before power is restored.