Phau Ntawv Qhia

43 44
7. Pull down the adjustment
webbing and adjust it to the
proper length to make sure your
child is properly secured.
(Fig. 27)
!
Make sure the space between the
child and the Shoulder Harness
Straps is about the thickness of
one hand.
8. If steps
(Fig. 22) (Fig. 23) (Fig. 24)
are taken when arriving at your
destination whilst removing the
child, then the harness will be
positioned so that it is out of the
way and ready for loading upon
your return to the vehicle.
see images
3
-
9
! Please install the child restraint on
the vehicle seat, and then put the
child in the child restraint.
see images
28
-
35
1. Press the ISOFIX adjuster button
(Fig. 28.1) and pull the base back
from the vehicle seat.(Fig. 28.2)
Using in the Forward Facing Mode
(Forward Facing Mode/for Child between
9-18kg / 2 -4 years old)
Reference age 2 - 4 years old
Recline position Position 1-5
2. Press the rotating button to rotate
for easier side loading/unloading
of the child, then rotate forwards
to desired direction.
(Fig. 29) (Fig. 31)
3. If a tighter install or increased
cabin space is required, then
press the ISOFIX adjuster button
(Fig. 30.1) and push to adjust.
(Fig. 30.2)
4. Install the child restraint in the
forward facing mode as (Fig. 31)
!
The ISOFIX connectors must be
attached and locked onto the
ISOFIX anchor points. (Fig. 31.1)
!
The load leg must be installed
correctly with green indicator.
(Fig. 31.2)
! Always make sure the seat is in
locked position (rearward facing /
forward facing) even when the
child is not in it.
27
28
1
2
31
2
1
29
30
1
2