Phau Ntawv Qhia

35 36
2. Insert ISOFIX guides to assist with
installation. (Fig. 4.1)
3. Press the ISOFIX adjuster button to
extend the ISOFIX. (Fig. 5.1)(Fig. 5.2)
4. After aligning the ISOFIX connector
with the ISOFIX Guide, hold the
ISOFIX connector with single hand,
insert the connector into the ISOFIX
hook which hung on the seat,
operate one side at a time. (Fig. 5.3)
! Make sure that both ISOFIX
connectors are securely attached
to their ISOFIX anchor points. The
colors of the indicators on the
both ISOFIX connectors should
be completely green. (Fig. 6.1)
! Check to make sure the base is
securely installed by pulling on
the both ISOFIX connectors.
5. After attaching the ISOFIX, pull the
load leg downward to floor
(Fig. 7)
When the load leg indicator shows
green, the load leg is installed
correctly. (Fig. 8)
!
The load leg has multiple positions.
When the load leg indicator shows
red this means the load leg is in the
wrong position.
!
Make sure the load leg is in full
contact with the vehicle floor pan.
Red means it is installed
incorrectly.
!
Squeeze the load leg releasing
button, then adjust the load leg
length.
!
Always make sure the support load
leg has direct contact with the floor
and is in locked position even when
the child is not in it.
4
1
1
6
7
8
5
1
2
3