Warranty

KettlePizza Gas Pro Startup:
Use of the KettlePizza Gas Pro requires a gas grill with a grilling surface of
at least 17 inches deep X 24 inches wide. The product works best with grills
that have at least three burners.
1. Start gas grill following grill manufacturer’s instructions.
2. Place KettlePizza Gas Pro onto grill surface. Try to locate the gas
burners evenly under the unit and push to rear of grill.
3. Turn all burners to high and close grill lid if possible (Note: some grills
will not have the clearance to close the grill lid – this is OK).
4. Allow KettlePizza Gas Pro to heat up for at least ten minutes. You want
the steel of the KettlePizza Gas Pro to get as hot as possible. It is this
heat that radiates down onto the top of the pizza or food you that is
being cooked.
5. When the KettlePizza Gas Pro thermometer has achieved at least 500
degrees F place stone onto grill surface in the center of the unit and
push it back.
6. Allow stone to heat up for another ten minutes.
Congratulations! You are now ready to cook pizza!