Installation Guide / Installationsanleitung

KETRON X8 & XD8
Istruzioni per l’apertura dello strumento
Instructions to open the instrument
Eseguire le operazioni adagiando lo strumento sopra un panno morbido per proteggere la
verniciatura da eventuali graffiature.
Rest the instrument on a soft cloth to avoid scratching the paintwork while the operations
are being accomplished.
Per l’apertura del coperchio rimuovere le
viti A, B e C (Fig. 1).
To release the cover remove screws A, B
and C (Fig. 1).
Fig. 1
Dopo aver tolto le viti di fissaggio, mettere
il blocco tastiere in posizione verticale e
alzare di qualche centimetro il coperchio
(Fig. 2).
After removing the screws carefully, put
the keyboard block to a vertical position
and turn over while holding the edges of
the instrument and lift the cover a few
centimetres (Fig. 2).
Fig. 2
Ruotare il coperchio facendo attenzione a
non sollecitare il cavo di collegamento con
il fondo (Fig. 3).
Rimuovere il blocco tastiere scollegando le
2 piattine.
Rotate the cover taking care not to
disconnect any of the cables connecting
the 2 parts (Fig. 3).
Remove the keyboard block disconnecting
the 3 flat cables.
Fig. 3