Operation Manual

The functions RIGHT VELO , LEFT VELO and LEFT DRUM are identical to the
functions described above but refer to the Style Accordion window.
- SUSTAIN: Select this function on the Touch Screen to adjust the Bass sustain value with the
Dial.
- RIGHT PRESET: This function allows you to select the sound to assign to the accordion
keyboard. To do this, simply touch the box to open the Voice selection page (Voice Select). Then press
Exit to return to the Classic Accordion screen.
-
BASS: This function allows you to assign 2 sounds to the Bass, for the Bass and Chord 1 section of
the Style. Here again when you touch the box a window which is very similar to the Voice Select window
is displayed on which you may select the instrument and category of instruments; press Exit to return
to the Classic Accordion screen.
- CHORD: This function allows you to assign 3 different sounds to the Chord tracks 3-4-5, following
the same steps described for the Bass.
A box indicating the Volume is displayed next to each of the 2 Bass sounds, the 2 sounds assignable to
the Chord tracks and the 4 Left Drum sounds. Touch the box and change the volume value with Dial.
The functions OCTAVE, PAN, REVERB and CHORUS are displayed at the bottom of
the screen. These are enabled only for the Bass and Chord tracks but not for the drums. When you
select one of these functions, the value of the function selected, namely the value of the octave
transposition of the Pan of the Reverb and Chorus of the sounds assigned to the Bass and Chord tracks
are displayed in the above box, which by default shows the volume. These values may be adjusted in
the same way as the Volume, namely by touching the corresponding box and adjusting the value with
the Dial.
You can save the settings made on this page: press
SAVE on the panel; the Pop Up box "SAVE
ACCORDION SETTING" appears on the display on which you may save the settings by
pressing
SAVE or escape by selecting CANCEL.
MENU