User Manual

KETRON K8 MIDI PEDALBOARD
The PK8 MIDI PEDALBOARD is a 13 note pedalboard, 8 NOTE POLYPHONIC, able to transmit
KEY VELOCITY, TRANSPOSER, NOTE SHIFT, SUSTAIN.
MIDI DEFAULT
The MIDI PEDALBOARD is setup as MIDI DEFAULT as follows:
MIDI TRANSMIT CHANNEL : 02
OCTAVE : OCTAVE 1 (C1 – C2)
KEY VELOCITY : ON
SUSTAIN : ON
TRANSPOSER : ON
MIDI CHANNEL
In order to select the MIDI CHANNEL, press the switch “MIDI CHANNEL” and while the switch is
pressed play the PEDALBOARD key corresponding to the MIDI CHANNEL desired (from ch1 to
ch13).
C1 = CH.01 D#1= CH.04 F#1= CH.07 A1 = CH.10 C2 =CH.13
C#1= CH.02 E1 = CH.05 G1 = CH.08 A#1= CH.11
D1 = CH.03 F1 = CH.06 G#1= CH.09 B1 = CH.12
If a channel different than 02 is requested, this must be set everytime after power-on because the
MIDI setup is not memorized.
TRANSPOSER / NOTE SHIFT
To obtain the TRANSPOSITION, press the switch TRANSPOSER and, keeping it pressed, play
the key of the pedalboard corresponding the note where you like to transpose the pedalboard.
For example, if “E” is hold down, the pedalboard will be transposed 4 half tones UP.
The -/+12 Transposition for Pedalboard can be obtatinet by pressing C1 or C2 on the Pedalboard
while TRANSPOSER tab is switched on.
SUSTAIN
The K8 MIDI PEDALBOARD can transmit the Sustain when the pedal switch “SUSTAIN” is
connected to the SUSTAIN input and is pressed.
12VAC∼ 0.2A
∼AC/∼AC adapter 230 / 12V 400mA
Specifications and appearance are subject to change without notice