User Manual

HOW TO AVOID RADIO/TV INTERFERENCE
This instrument operates at radio frequencies, and if not correctly installed according to the
instructions supplied, it may cause interference with radio and television reception.
Though this instrument has been designed according to the applicable standards and
notwithstanding the reasonable protections against interference it has been equipped with,
there is no guarantee that such events will not occur. In order to check if the interference is
actually caused by this instrument, switch it off and see if the interference disappears.
Then switch it on again and check if the interference appears again.
Once you have made sure that the interference is originated by this instrument, take one
of the following measures:
• Turn the radio or TV antenna in a different direction. .
• Modify the instrument's position with respect to the receiver.
• Increase the distance between the instrument and the receiver.
• Connect the instrument's plug to a different outlet to make sure that the instrument and
the receiver are connected to two different circuits.
• If necessary, contact a specialised technician.
WARNINGS
After having read the safety precautions and instructions on the previous pages, carefully
read and conform to the following recommendations:
HOW TO CLEAN THIS INSTRUMENT
Use only a soft and dry cloth to clean the external surface of your instrument.
Never use petrol, thinners or solvents generally speaking.
OTHER PRECAUTIONS
• If you wish to use your instrument abroad and if you have any doubts about the power
supply,contact a qualified engineer previously.
• The instrument should never be subject to strong vibrations.
• Never exert excessive pressure on the keys and knobs.