App Manual Content 1
Table of Contents 3 Launch Screen 17 Manage Connection 3 Bluetooth Connect Screen 17 Data Refresh Rate 3 Welcome Screen 18 Manage Logging 4 Home 18 Logging - Clear Data 5 Main Menu Stack 19 Manage Alerts 5 Connected Devices Stack 20 Alerts - Manage Range 6 New Device Setup 20 Alerts - In-App Live Alert 6 Register 20 Alerts - Background Alerts 11 Readings 20 Banner 12 Stats 20 Alert 13 Stats - Readings Range 21 App Preferences 13 Stats - Range Refined 13 Stats -
Launch Screen Upon opening the app the launch screen is briefly displayed while the app loads. 3 Bluetooth Connect Screen Welcome Screen If Bluetooth is turned off on the device, a prompt will appear asking to turn Bluetooth on. With Bluetooth off the app will not be able to connect to Kestrel devices. When the app is launched for the first time, the user is given two options for the selection of their app units. These units will be used throughout the app. This can be changed in the app setting.
Home Connected Device Signal Strength Non-Connected Device Add Device Quick links at the bottom of the homepage bring the user to NK support or the store . Once arriving at the homepage, all available devices will be displayed. This includes connected devices, and devices not yet connected.
Main Menu Stack The top left corner stack reveals the main navigation menu of the app. It allows for quick navigation from anywhere in the app. 5 Connected Devices Stack The top right corner stack reveals the device list. It shows the connected and previously connected devices. It allows for quick navigation to devices from anywhere in the app.
New Device Setup When setting up a device the user will be prompted to name that device. This name will appear throughout the app and can be altered later through the device settings page. 6 Register After setting up a device users will be prompted to register with NK. This is optional for the user.
Dashboard The Edit Dashboard option allows the user to replace the current measurements with new measurements and re-arrange measurements on the dashboard. The Share Dashboard option allows the user to share the measurements of their dashboard and an image of the current screen through social media, email, and messaging. The More tab allows the user to open the bottom navigation of the current device and switch between the pages of the device. The dashboard is the main page for each device.
Bottom Navigation Arrows are active when additional products are connected demonstrating the ability to swipe on the device name to switch between devices. Other States No devices, or no other devices connected. Other devices connected, swipe to the right, to reveal the device to the left.
Edit Dashboard Once Edit Dashboard has been selected, the edit menu appears at the bottom of the screen displaying the different measurements available for the device currently being viewed. 9 Edit Dashboard - Drag When the user drags the icon to a section of the dashboard, a large icon will follow the dragging motion. Measurements can also be switched from panel to panel within the edit screen by dragging one measurement from one panel to the other desired panel.
Edit Dashboard - Drop Edit Dashboard - Save When the user releases over the desired location, the panel is switched with the new measurement. It is not activated until the save button is pressed. Once the user has pressed save, the new panel or panels will become active and the Edit Dashboard menu will hide again.
Share Dashboard When sharing the dashboard, iOS takes the user through their standard share process. This display would be different across different versions of iOS. 11 Readings The Readings page allows the user to view all of their measurements from the given device in a listed format.
Stats Users click this to export the data provided below If the user would like to adjust the range of data throughout all the readings, they can click here to adjust the range. If the user would like to view a detailed view of a specific measurement, selecting the arrow next to the measurement brings them to it. (page 12) The Stats page allows the user to view all of their measurements’ averages as well as maximum and minimum readings.
Stats - Readings Range In the Stats page there is an option to adjust the readings date range. This will restrict the readings of all the measurements to a specific range in date and time so the user can more accurately view the information. 13 Stats - Range Refined Once the user has submited their desired range, they are brought to the stats page again, now showing that the reading range is defined as Refined.
Stats - Exporting If the user decides to export their data, the load screen appears while the app collects all the neccessary information to be exported. 14 Stats - Sharing The user is then prompted to choose how they would like to export their data, and where they would like to share it to.
Log Log - Scrolling As with the Stats page, the Log page has the same functionality for setting a data range. (Stats - Data Range, Page 13) When searching through data points, there can be an overwhelming amount of points to go through. Because of this, two types of scrolling were developed to help ease the process of finding information faster. Flick to Scroll Each reading is marked with a yellow dot which can be scrolled to for more precise information located on top of the graph labeled “Data Point”.
Manage Manage - Device Info Disconnect: Removes active connection between the app and device Forget Device: Disconnects the current device and forgets the devices settings and content LED Flash: Sends a signal to the device to flash its LED so the user can find it Factory Reset: Restores the device to its default settings Device Manual: Provides user with the manual for the current device Device Info: Provides the user with a detailed look at the device’s technical information The Manage page provides th
Manage Live Readings From the Manage page, Manage Live Readings allows the user to adjust the transmission rate of the device. 17 Data Refresh Rate Data Refresh Rate can be altered by using the scroll wheel to adjust the rate and then clicking submit to confirm the change.
Manage Data Logs Logging - Clear Data Wrap log is an overwrite feature that will discard the oldest data point to capture new data when the log becomes full. The data log interval can be changed using the scroll wheel and clicking submit to save the changes Within Manage Data Logs the user has the ability to wrap their log, adjust their logging rate, and clear their data. 18 In the Clear Data menu the user can choose between three options which are briefly explained to the right of the options.
Manage Alerts By choosing the arrow next to a specific measurement you enter the settings of that specific alert (Page 20). The Kestrel app allows the user to be alerted when specific measurements reach a maximum or minimum point. The Alerts settings allow the user to manage those alerts.
Alerts - Manage Range Alerts - In-App Live Alert Alerts - Background Alerts While out of the app the user still recieves alerts if they choose to through Apple’s notification center settings. The two options iOS offers are: Banner Alert The user can also choose to go into each When a measurement has fallen or risen above measurement category and turn them on or below the range, a live alert screen pops up to individually. The minimum and maximum settings inform the user.
App Preferences Allows the user to control the units of measurement the app will use and adjust how devices connect. 21 319916_1_14.09.
