User Manual

The ORACLE™ controller can only control either the Revolution Head or an
elektraDRIVE motor at one time. To perform 3-axis movements with both
the Revolution Head and a elektraDRIVE motor for a slider at the same time,
you will need two controllers.
The ORACLE™ is Intervalometer capable. To use this function, you will
need the $99.95 Camera Control Module.
v3.02SL Updates
- Disabled the joystick while in Camera mode to prevent any unwanted
movement
- Updated timer display. Reads hours, minutes, seconds now.
- Added “cruise control” feature to toggle holding of joystick speed.
- Improved SmartLapse® record speed and playback accuracy.
- Stop Motion now allows you to take as many pictures as you need
before moving on to the next point.
- Simple mode now allows you to make a move while in the set up menu
- Added MENU to nish live recording.
- Corrected an occasional glitch that could cause SmartLapse® playback
to lurch at the beginning.
- Added timer to Intervalometer Only.
- Incorporated Shoot-Move-Shoot & Continuous Intervalometer into
Advanced mode
- Added “saved” splash screen after recording to conrm the recording
was saved.
- Overall better ow/more intuitive menu design that allows scrolling
through menus by moving the joystick left/right.
UPDATES, FEATURES, SPECS & ACCESSORIES
Included Items:
• ORACLE™ Controller
• 100v-240v input (50-60Hz, 1.4A) AC Power Supply w/ North
America Wall Plug.
• 25ft CAT5 Cable
Optional Accessories:
• elektraDRIVE 12v DC Power Adapter
• elektraDRIVE 12v Battery
• 12v Y Adapter
• Australia / New Zealand Region Wall Cord
• F.I.G.S. / Continental Europe Region Wall Cord
Supported Features & Specications:
• Backlit LCD display with menu and setting values.
• Fully adjustable controls for Max Speed, Dampening, &
Dead Band.
• Movement Recording / Memory Function with three memory
banks.
• Time Lapse control
• Premium Multi-Function Joystick
• Joystick orientation can be easily set in the menu.
• Cabling is CAT5 / CAT6 cable with RJ45 connectors (standard
network cable).
• Powered by standard AC power supply with wall plug, or
optional 12v DC adapter and battery pack.
• SmartLapse™ advanced time lapse recording option
• Rear Mount - Rotatable (Clamp from 0.5”-1.25”)
Operation Power Range
• 11.9 VDC to 15 VDC
• 4.16 Amps (minimum)
3