User Manual

7. To stop recording press the same memory bank BUTTON
(1, 2, OR 3) you chose earlier or press the MIDDLE JOYSTICK
BUTTON.
8. To playback the SmartLapse™ recording, press the memory
bank BUTTON (1, 2, OR 3) that you recorded to and adjust the
play back time using the joystick.
9. Move the joystick up or down to select one of the
following: ShootMoveShoot, Continuous,
Stop Motion, or No Intervlmtr(Intervalometer)
Press the MIDDLE JOYSTICK BUTTON or ENTER to conrm
Note:
See page 17 for details on dierent shooting modes
10. Move the joystick UP/DOWN to select the desired
Exposure Time
11. Press ENTER or the MIDDLE JOYSTICK BUTTON to conrm
or scroll through the sub-menus by moving the joystick
LEFT/RIGHT
SKIP TO NEXT PAGE FOR STOP MOTION
ShootMoveShoot
Continuous v
Stop Motion ^
No Intervlmtr
SMARTLAPSE™ TIME LAPSE
MOTION CONTROL - SMARTLAPSE™ CONTINUED
12. Move the joystick UP/DOWN to select the desire
Shutter Delay
13. Adjust the Run Time/Pictures from the time it
took to make the recording up to 999 days.
14. Return to your marked Start Position
15. Press ENTER or the MIDDLE JOYSTICK BUTTON
16. Adjust any desired Delay Time before your movement
starts
17. You will see the current memory bank being used as well as
the time remaining
18. To cancel the playback and return to the menu, press the
MENU BUTTON on the ORACLE.
Exposure Time
1.00 S
Run Time 14M 20S
Pictures 431
Delay Timer
1.00 S
19
Shutter Delay
1.00 S
Memory 1 427
E/D 1.00 S 13M 54S
Remaing Exposure/Delay Time Overall Time Remaining
Saved Memory Bank Pictures Remaining