User Manual

SLIDER/DOLLY RECORD & PLAYBACK

MOTION CONTROL - LIVE RECORDING

This section will cover recording and playing back real-time

camera moves on a Kessler Crane slider/dolly unit.

1. Once in Slider/TT mode press the MENU button until you

get to the main menu

2. Use the joystick to move the camera carriage to your desired

start position. Note this position. For convenience you can use

a piece of tape, wax pencil, or optional measuring strip.

3. Move the Joystick down and select Motion Control

Press the MIDDLE JOYSTICK BUTTON or ENTER to conrm

4. Move the Joystick down and select Live Record.

Press the MIDDLE JOYSTICK BUTTON or ENTER to conrm

5. Press any 1, 2, 3 Button to select a memory location

Camera

Motion Control < v

Note:

You can also set a Live Record on a specic memory location by

holding down any 1, 2, or 3 button for 5 seconds from the home screen

followed by choosing Live Record

6. The screen will display Erasing

7. Move the joystick to begin recording your camera

movement. Press the MIDDLE JOYSTICK BUTTON to begin

recording with a pause before the beginning your movement.

8. The MAX SPEED, DAMPING, and DEADBAND dials can all be

adjusted during this time and will be recorded as will the

timing.

9. All movement is recorded in real time and a seconds counter

is displayed on the screen.

Erasing.

Move Joystick to

Start Record

Live Record.

Press 1, 2 or 3

SmartLapse

Live Record < v

Recording

1 10

Memory Bank Seconds Counter