User Manual

CAMERA

This function allows you to control your camera through the

Oracle controller. You must have the Kessler Crane Camera Control

Module for this to function.

Pictures: The number of pictures that will be taken over the specied

Time Lapse period

Exposure Time: The time that the shutter is open for each photo

Shutter Delay: The time that the shutter is closed between each

photo that is taken

1. Enter Camera mode by selecting Camera from the

main Menu

Press ENTER or the MIDDLE JOYSTICK BUTTON to conrm

2. Select Camera Setup

Press ENTER or the MIDDLE JOYSTICK BUTTON to conrm

Note:

You can move the joystick LEFT/RIGHT to navigate through sub-menus

4. Change Exposure Time values by moving the joystick

UP/DOWN

Press ENTER or the MIDDLE JOYSTICK BUTTON to conrm

Camera <

Motion Control v

Camera Setup <

Intervmtr Start

5. Change Shutter Delay values by moving the joystick

UP/DOWN

Press ENTER or the MIDDLE JOYSTICK BUTTON to conrm

Note:

Use 0.50 seconds or more for most applications. If you use a faster

shutter delay (ex. 0.25 s), your camera may not be able to recover fast

enough.

5. Select Intervmtr Start by moving the joystick

UP/DOWN

Press ENTER or the MIDDLE JOYSTICK BUTTON to conrm

6. Change Pictures/Run Time values by moving the

joystick UP/DOWN

Press ENTER or the MIDDLE JOYSTICK BUTTON to conrm

Shutter Delay

0.50 S

Camera Setup

Intervmtr Start <

Exposure Time

1.00 S

Run Time 33M 20S

Pictures 1000