DISPENSA Pantry VVS-X Mounting Instruction “DISPENSA” Pantry pull out http://www.cleverstorage.com/technical-support/ 1 21 3 + fasteners are not included use use 8x 12x pan head KESSEBÖHMER = max 120 kg / 265 lbs Empty weight + Load 4mm flat head MA 403 740 0000 Rev.
DISPENSA Pantry VVS-X SYMBOLE • SYMBOLS • SYMBOLES • SYMBOLI • SIMBOLOS • SIMBOLOS • MERKIT • SYMBOLER • SYMBOLY • SYMBOLE • Warnung! • Warning! • Avertissement! • Avvertenza! • ¡Advertencia! • Aviso! • Varoitus! • Advarsel! • Výstraha! • Ostrzezenie! • Nicht korrekt! • Incorrect! • Incorrect! • Non corretto! • ¡Incorrecto! • Incorrecto! • Väärin! • Ikke korrekt! • Nesprávnê! • Nieprawidlowo! Korrekt! • Correct! • Correct! • corretto! • ¡Correcto! • Correcto! • Oikein! • Korrekt! • Správnê! • Prawidlowo!!
DISPENSA Pantry VVS-X 1 Check your cabinet construction 2 Use a shim min. 50 (2“) 420 (16 flush max 3.2 (1/8”) 1/2”) ! 102 (4”) 508 20” KESSEBÖHMER MA 403 740 0000 Rev.
DISPENSA Pantry VVS-X Faceframe Cabinet with inset door Frameless Cabinet with overlay door = = = = = / “) (7 (8 Center 1 2 14 32 / “) ) / “ door door Inset with overlay (18 494(19 464 Cabinet with Framed Cabinet ) 5 /32“ (1 29 18 /32“) ( 14 = ) / “ ) / “ 31 32 5 32 (18 (20 512 482 ) 27 /32“ (1 1 4“) 47 / (1 32 Framed 24 (30 /32“) = Framed / “) / “) 13 32 21 32 (8 (7 (2 60 door 28 (1 3 32 / “) 3 /8“) Overlay 188 with Line Line Center Cabinet FRONT = = = =
DISPENSA Pantry VVS-X 5 use 12x Drilling positions for CNC machining flat head Framed cabinet with overlay door = 69 (2 23/32“) 101 (3 31/32“) = 229 (9 1/64“) 261 (10 9/32“) Framed cabinet with inset door Frameless cabinet with overlay door 69 ( 2 23/32“) = = Use flat head screw min Ø4.5 (3/16“) 101 (3 31/32“) 229 (9 1/64“) 489 (19 1/4“) 41 (1 39/64“) 393 (15 15/32“) 457 (17 63/64“) KESSEBÖHMER MA 403 740 0000 Rev.
DISPENSA Pantry VVS-X 6 Installation depth bottom runner 19 4 (3/ ") faceframe overlay 19 4") (3/ faceframe inset 19 4") (3/ frameless KESSEBÖHMER MA 403 740 0000 Rev.
DISPENSA Pantry VVS-X 7 Installation depth top runner faceframe overlay 50 (1 31/32") 50 (1 31/32") faceframe inset 50 (1 31/32") frameless KESSEBÖHMER MA 403 740 0000 Rev.
DISPENSA Pantry VVS-X 8 Complete runner and frame installation a. c. 1/8” 1/4" ! No oil ! No dirt ! b. C = KESSEBÖHMER MA 403 740 0000 Rev.
DISPENSA Pantry VVS-X Drillhole position door brackets 11 (7/16") 9 32") 1 2 13 11 (7/16") A A + 97 (3 13/16") 11 (7/16") A 156 (6 5/ Z 32") 156 (6 5/ Overlay door A Inset Door x x Z = 13.5 (17/32“) - X KESSEBÖHMER MA 403 740 0000 Z = 13.5 (17/32“) + X Rev.
DISPENSA Pantry VVS-X 10 use Mount door brackets 8x pan head Mount bottom bracket first! = 1 2 13 A A (transfer A of the frame) A = Y = = Overlay door A Inset Door x x Y = 62 (2 7/16“) - X KESSEBÖHMER MA 403 740 0000 Z = 62 (2 7/16“) + X Rev.
DISPENSA Pantry VVS-X 11 Mount the door ! KESSEBÖHMER The cabinet needs to be secured plumb and level! MA 403 740 0000 Rev.
DISPENSA Pantry VVS-X 12 Adjustments PZ-2 = Side to side adjustment adjust tighten fixing screw adjust ! KESSEBÖHMER MA 403 740 0000 Rev.
DISPENSA Pantry VVS-X Installing the shelves 14 Door a. Install shelves resting the front edge first, then engage the back hooks. Don’t push on side rails to install ! b. ! c. Subject to technical modifications without notice. KESSEBÖHMER MA 403 740 0000 Rev.