User guide

3. Assembly Instructions

All NERIS folding kayaks are run through

presale test assembly. However, the

first kayak assembly may seem to be

more challenging then following one.

The skin is being stretched with each

assembly and it will be easier to put the

skin on a frame.

Two people kayak assembly is

recommended. The kayak is to be

assembled on even and clean surface.

Avoid assembling the kayak on sand. It

may cause damage to joining parts and

more difficult assembly and

disassembly in future.

The main parts of the kayak are marked

with numbers and pointing arrows for

ease of assembly.

– Stern, Left

Bow, Right

Stern, Right

Marking points:

Bow, LeftLB –

–

Step 1.

Attach Cross ib #1 to Bow Assembly as marked with

two arrows pointing each other. Use a wing nut and

bolt to secure the crossrib.

Repeat this step for stern assembly using Cros ib #7.

The Assembly upper and middle s are

connected by plates with keyhole slots to be secured

on sides of Cross ibs #1 and #7.

stringer