User manual

YKS-01-BA-e-1010 7
6 Operating elements
After the power supply unit has been connected to the printer and the mains, and after
the
ON/OFF switch of the printer has been switched to “ON” position, the
red indicator for the power supply will light up.
This indicator also signals that the printer is ready for operation.
7 Start-up
⇒ On start-up press the FEED key; printer carries out self-test
and parameters will be printed.
Red LED is lit up, printer is ready for operation.
⇒ Press “FEED” key: Switch numerator on or off, when statistics function is „ON“
⇒ Press and hold “FEED” button: Paper transport.
⇒ Press “FEED” button: Switch date and time on or off, when statistics function is
„ON“