Instructions

TGD-BA-e-1810 2
GB
KERN TGD
Version 1.0 2018-06
Operating manual
Electronic Carat Pocket Scales
1. Technical data
KERN TGD 50-3C
Item no./ Type
TTGD 50-3C-A
Readability (d) 0.001 g / 0.005 ct
Weighing range (max) 50 g / 250 ct
Adjustment weight, not added (class)
50 g (F2)
Operating temperature + 10° C .... + 30° C
Humidity of air max 80% air humidity (non-condensing)
Automatic cut-off after 300 seconds
Batteries 4 x 1.5 V AAA (Running time rating 150 hrs)
2. Scope of delivery
• Pocket scale • Weighing pan • Power cable
• Balance cover • Batteries (4 x 1.5 V AAA) • Operating manual
3. Keyboard overview
ON/OFF
Switch on/off
MODE
Switch-over weighing unit
TARE
Taring / Setting to zero
PCS
Parts counting
4. Operation
Weighing:
 Place the balance on a firm, level surface. Level balance with foot
screws until the air bubble of the water balance is in the prescribed
circle.
Check levelling regularly
 To switch on, press ON/OFF button, the balance completes a self check. As soon as the weight
display appears, the balance is ready for weighing. If required, set to zero by using TARE button.
 Place load on pan and read the weighing result.
 Use the MODE button to switch over into the available weighing settings.
Taring:
 Place the empty weighing container.
 Press the TARE button, the zero display disappears.
 Weigh the material, the net weight will be indicated.
 When the balance is unloaded the saved taring value is displayed with negative sign.
 To delete the stored tare value, remove load from weighing pan and press the TARE button.