User manual

RPB_D-BA-e-1324

6.3.2 Scope of delivery / serial accessories:

Balance, see chap. 2

Mains adapter

Protective cover

Instruction Manual

6.4 Mains connection

Power is supplied via the external mains adapter. The stated voltage value must be

the same as the local voltage.

Only use KERN original mains adapter. Using other makes requires consent by

KERN.

6.5 Battery power supply (option)

The rechargeable battery is charged via the delivered power supply.

Before the first use, the battery should be charged by connecting it to the mains

power supply for at least 15 hours.

If an arrow appears on the weight display  above the battery symbol , this

is an indication that the capacity of the rechargeable battery will soon be

exhausted. The balance will be ready to operate for about another 10 hours, then

it will switch off automatically. Charge the battery with the help of the supplied

power pack.

If in the weight display appears „bat Lo“ followed by a flickering display, the

capacity of the rechargeable battery is below the prescribed minimum. The

balance will be ready to operate for about another 5 minutes, then it will switch off

automatically. Charge the battery with the help of the supplied power pack.

The LED display informs you during loading about the loading status of the

rechargeable battery.

red:

Battery is almost discharged

green:

Battery is completely discharged

6.6 Initial Commissioning

In order to obtain exact results with the electronic balances, your balance must have

reached the operating temperature (see warming up time chap. During this warming

up time the balance must be connected to the power supply (mains, accumulator or

battery).

The accuracy of the balance depends on the local acceleration of gravity.

Strictly observe hints in chapter Adjustment.