User manual

ALT-A02/PLT-A01-BA-e-1310 27
 If possible, immerse the sinker bubble-free in the test liquid.
Make sure that the sinker is at least 1 cm immersed.
 Wait for stability display [ ], take over the weight value „sinker in test liquid“
using the PRINT button. The density of the test liquid is shown at the
temperature displayed by the thermometer.
 When an optional printer is connected, the displayed value can be edited using
the PRINT button.
Printout example (KERN YKB-01N):
d: 2.0000 g/cm
3
Return to weighing mode
 Press the ON/OFF key
 or use the MENU button to start a new measuring cycle.
If at the density determination errors have appeared, „d-----„ is displayed.