User manual

ALT-A02/PLT-A01-BA-e-1310 21
6.1 Balances with graphic display (KERN ALT-B, PLT-A, PLT-F)
 In weighing mode press MENU button. The master menu will be displayed.
 Use the navigation buttons

to select the menu item „Density“.
 Acknowledge using PRINT button, the current setting is displayed.
 Use the navigation buttons

to select the setting „Liquid“.
 Confirm using the PRINT button, the currently set density of the sinker is
displayed (factory setting 3.0000 g/cm
3
).
 Read off the density of the sinker on the storage box and enter it. To delete keep
pressed the TARE button. Use the navigation buttons

to increase/reduce the
digit. Use the TARE button to select the next digit. Repeat this sequence for
each digit.
 Confirm by pressing the PRINT button. The display for weight determination of
the "Sinker in air“ appears.
 If weighing balance does not show Zero, press TARE.
3.1000g/cm
3