User manual

18 ALT-A02/PLT-A01-BA-e-1310
 The display for weight determination of the "sample in air“ appears.
 Confirm by pressing the PRINT button.
 Should the balance not show Zero, press the TARE button.
 Lay the solid matter in the upper sample dish.
 Wait for stability display [
], then take over the weight value „sample in air“ using
the PRINT button.
 Wait until the display for weight determination of „sample in aid liquid“ appears.
 Confirm by pressing the PRINT button.
 Remove the sample and if required tare by using the TARE button.
Sample