Manualshelf

User manual

ManualsBrandsKERN ManualsScalesSet for density determination for PLT
11121314151617181920
Table Of Contents
ALT-A02/PLT-A01-BA-e-1310 15
Wait until the display for determination of „sample in aid liquid“ appears. Remove
the sample and if required tare by using the TARE button.
Lay the sample into the lower sample dish and immerse it in the aid liquid trying
to avoid bubble formation.
Make sure that the sample is at least 1 cm immersed.
Wait for stability display [ ], take over the weight value using PRINT button. The
density of the sample is shown.
Sample