User manual

ALT-A02/PLT-A01-BA-e-1310 13
5.1 Balances with graphic display (KERN ALT-B, PLT-A, PLT-F)
 In weighing mode press MENU button. The master menu will be displayed.
 Use the navigation buttons

to select the menu item „Density“.
 Acknowledge using PRINT button, the current setting is displayed.
 Use the navigation buttons

to select setting „Solid body“.
 Confirm using the PRINT button, the set density of the aid liquid is displayed
(factory setting 1.0000 g /cm
3
for distilled water at 20°C).
 To change (see table chap. 8) press the TARE button.
To delete keep pressed the TARE button. Use the navigation buttons

to
increase/reduce the digit. Use the TARE button to select the next digit. Repeat
this sequence for each digit.
 Confirm entry with PRINT button, the display for calculation of „Weight in air“ is
displayed.
Should the balance not show Zero, press the TARE button.