User manual

PLJ-GM-BA-e-1312
39
 Confirm by pressing
PRINT
, „0.0“ appears and „Min“ is
displayed
0.0 g
 Place the test items, the entered tolerance range is
displayed by „Min“, „OK“ and „Max“
The value entered for the upper tolerance limit must be greater than the lower
tolerance value. Error message –Lo- appears on the display and the display returns
to weighing mode.
8.10 Percent determination
Percent determination allows weight display in percent, in relation to a reference
weight.
8.10.1 Determination of the reference weight by weighing
Operation:
Display:
 Selection of menu item P4 Func
P4 Func
 Press
TARE
4.1.FFun
 Press
TARE
, the menu item set as last flashes
PcS
(Example)
 Press repeatedly until „HiLo“ is displayed flashing
PrcA
 Press
TARE
4.1.FFun
 Press
F
repeatedly until “SAVE?“ appears
SAVE?
 Confirm by pressing
PRINT
, „0.0“ appears
0.0 g
 Press
F
, „0.0“ appears and % is displayed flashing
0.0
%