User manual

PLJ-GM-BA-e-1312
33
8.7.2 Auto Zero
This function is used to tare small variations in weight automatically.
In the event that small quantities are removed or added to the material to be
weighed, incorrect weighing results can be displayed due to the “stability
compensation“ in the balance. (e.g. slow flow of liquids from a container placed on
the balance, evaporating processes).
When apportioning involves small variations of weight, it is advisable to switch off
this function.
Auto Zero no Disconnection of auto zero function
Auto Zero YES Auto zero function turned on
Operation:
Display:
 Selecting the menu item
P1 rEAd
 Press
TARE
1.1.Fil
 Press until the following display appears
1.2 Auto
 To change your selection, press
TARE
.
no
 To change your selection, press .
YES
 Setting will be imported by pressing
PRINT
.
1.2 Auto
For this, press
F
repeatedly until SavE ? appears on the display. Store changes
carried out by pressing
PRINT
.