User manual

PLE-N-BA-e-1222 45
11.6 Remote control instructions
Instruction:
Function
“T” = H54
Taring
“C” = H43
Adjustment
“E” = H45
Enter
“M” = H4D
Menu
“O” = H4F
ON/OFF
11.7 Printer mode
The following conditions must be met to provide successful communication between
the weighing balance and the printer.
Use a suitable cable to connect the weighing balance to the interface of the
printer. Faultless operation requires an adequate KERN interface cable.
The Baud rates of balance and printer must agree, see chap. 9.3.