User manual

PLE-N-BA-e-1222
28
10 User menu
The following operating modes may be enabled/disabled in the user menu:
Count

Parts counting
Dens

Density determination of solids/liquids
HoL

Checkweighing
Perc

Percent determination
M Load

Peak value function
End
Navigation in the menu
Access to menu
In weighing mode press MENU button. The first menu item
„count“ is displayed.
How to select
menu items
Using the MENU button the individual menu items can be
selected one after the other.
 Scroll forward using MENU button
 Scroll backward using CAL button
Change settings
Acknowledge selected menu item using PRINT button, the
current setting is displayed. Each time the arrow buttons  
are pressed the next setting will be displayed.
 Scroll forward using MENU button
 Scroll backward using CAL button
Save settings
Take over selection using the PRINT button.
Weighing balance returns to menu. Either make more settings
in the menu or go back to menu mode as follows.
Exit menu/
back to
weighing mode
Press the MENU button and keep it pressed until the acoustic
signal gets mute. The balance returns automatically into
weighing mode.