User manual

PES-A02-IA-defsi-0610

4 Operation

1. Connect mains adapter and start the balance by pressing the ON/OFF key

2. Entering limiting values

3. Evaluation of readings via relay contacts

4. Status balance/contact

Status balance Display Contact

Reading outside condition No reading display inactive

Reading outside range No reading display inactive

Input of invalid values Five symbols appear

on the left

inactive

Error message

(o-ERR/u-ERR)

o-ERR/u-ERR

• OFF during measure-

ment of limits 1-5

• ON during ERR

During input Input appears on display inactive

Waiting for stability

message as per tares

[M] flashing Last display fixated

Stand-by Stand by LED glowing inactive

Sleep mode Sleep LED glowing Output of evaluation result

Automatic check of

balance at starting

[88888888] glowing

inactive

5. Output by external signal

• Contacts and audio signals are started by the weighing result, but may also be

triggered by an external signal

• Whilst the menu is set [2B. R.Q.m. 2] there is an output of the weighing result for

approx. 200 ms after the signal was applied

• For pulsed, external signals the output signal will follow after 100 ms at the

earliest