User manual

PES-A02-IA-defsi-0610
14
3 Menu settings
For further information on menu settings please refer to the operating instructions
supplied with all balances.
Default settings:
Additional functions
[r SEL 2 ]
Tolerance weighing active
Display conditions of the
tolerance marker
[21. CQ. 1 ]
Tolerance marker is always
displayed, even if standstill
control is not yet displayed.
Tolerance range
[22. LK.1 ]
Tolerance marker is displayed
for the whole range.
Number of limiting points
[23. P1 2 ]
2- Limiting points (+/OK/-)
Assessment
[24. TXP. 1]
Evaluation for absolute values
Signal at limit 1
[25. BW.K 0]
No signal at limit 1(-)
Signal at limit 2
[26. BW.2 0]
No signal at limit 2(Ok)
Signal at limit 3
[27. BW.3 0]
No signal at limit 3(+)
Signal at limit 4
[28. BW.4 0]
No signal at limit 4
Signal at limit 5
[29. BW5 0]
No signal at limit 5
Display of
Results
[2A. LG 1 ]
Display via +, OK or -
Output setting
[2B. R.Q.m. 1]
Continuous output