User manual

PES-A02-IA-defsi-0610
12
2 Specification
2.1 Pin allocation of balance output plug D-SUB25P
PIN Signal
Input/
Output
Function
1 1. Limit (LOW) NO Output ON, when first limit (LOW) is reached
2 1. Limit (LOW) NC Output OFF, when first limit (LOW) is reached
3 1. Limit (LOW) COM - Joint contact first limit (LOW)
4 2. Limit (OK) NO Output ON, when second limit (OK) is reached
5 2. Limit (OK) NC Output OFF, when second limit (OK) is reached
6 2. Limit (OK) COM - Joint contact second limit (OK)
7 3. Limit (HIGH) NO Output ON, when third limit (HIGH) is reached
8 3. Limit (HIGH) NC Output OFF, when third limit (HIGH) is reached
9 3. Limit (HIGH) COM - Joint contact third limit (HIGH)
10 4. Limit NO Output ON, when forth limit is reached
11 4. Limit NC Output OFF, when forth limit is reached
12 4. Limit COM - Joint contact forth limit
13 5. Limit NO Output ON, when fifth limit is reached
14 5. Limit NC Output OFF, when fifth limit is reached
15 5. Limit COM - Joint contact fifth limit
16 ERR NO Output ON in case of error message
17 ERR NC Output OFF in case of error message
18 ERR COM - ERR joint contact
19 During
measurement
NO Output ON, if measured quantity is 5 times
greater than reading range
20 During
measurement
NC Output OFF, if measured quantity is 5 times
greater than reading range
21 During
measurement
COM - Joint contact during measurement
22 Audio signal NO Output On for audio signal
23 Audio signal COM - Joint contact when audio signal is given
24 External signal (+) Input Contact for output control (+)
25 External signal (-) Input Contact for output control (-)