User manual

PES/PEJ-BA-e-1316
33
7.2.1. Parameter additional functions
Not displayed at menu setting „ “
Function
Display
or
Selection
or
Description of options
Display conditions of
the tolerance marker
*
Tolerance marker is always displayed, even if
standstill control is not yet displayed.
Tolerance marker is only displayed in connection
with standstill control.
Tolerance range
Tolerance marker is only displayed above zero
range (mind + 5).
*
Tolerance marker is displayed for the whole
range.
Number of limiting
points
1- Limiting point (OK/ -)
*
2- Limiting points (+/OK/-)
3- Limiting points (1-4)
4- Limiting points (1-5)
Assessment
*
Evaluation for absolute values
Evaluation for difference values (with reference
weight)
Signal at limit 1
*
No signal at limit 1(-)
Signal at limit 1 (-)
Signal at limit 2
*
No signal at limit 2(Ok)
Signal at limit 2(Ok)
Signal at limit 3
*
No signal at limit 3(+)
Signal at limit 3(+)
Signal at limit 4
*
No signal at limit
Signal at limit 4
Signal at limit 5
*
No signal at limit 5
Signal at limit 5
Display of
Results
*
Display via +, OK or -
For setting 2 limits display in bar graph is possible
Relay output setting
*
Permanent output, depending external signal
Output controlled by external signal
Add
*
Adding function
Adding function with AUTO-TARA