User manual

PCD-BA-e-1211 33
8.4.2 Printout
Using this function data are selected which are to be sent via the
RS232C (not valid for data transfer mode BAPr ).
 In weighing mode keep the PRINT key pressed until “Unit“
appears.
 Press the MODE key several times until „LAPr“ is displayed.
 Acknowledge using SET key, the current setting is displayed.
 Select the desired output parameter by pressing the MODE key
Hdr
Edition of the headlines
GrS
Edition of the total weight
Net
Edition of net weight
tAr
Edition of tare weight
N7E
Edition of the stored weight
PCS
Edition of quantity
AUJ
Edition of piece weight
Rqt
Edition of the reference quantity
FFd
Edition of a page forward feed when printout is started
FFE
Edition of a page forward feed when printout is ended
 After actuating the SET button, the current state is displayed
( on / off ).
 Use MODE and PRINT key to change the status
„on  off“.
 Use the SET key to confirm selection. The balance returns to
weighing mode.
By that way the user can configure his own data block, which then is
sent to a printer or to a PC.