User manual

PCB-BA-e-1315
33
Baud rate
The baud rate defines the transfer speed vie the interface, 1 Baud =
1 Bit/second.
 In weighing mode keep the PRINT key pressed until [Unit]
appears.
 Press the MODE key several times until „bAUd“ is displayed.
 Acknowledge using SET key, the current setting is displayed.
 Use MODE key select the desired settings
9600  4800  2400  1200  19200
 Use the SET key to confirm selection. The balance returns to
weighing mode.
10 Data output RS 232 C
10.1 Technical Data
8-bit ASCII Code
1 start bit, 8 data bits, 1 stop bit, no parity bit
Baud rate selectable at 1200, 2400, 4800 , 9600 and 19200 baud
Miniature plug-in necessary (9 pole D-Sub)
For operation with interface faultless operation is only ensured with the correct
KERN – interface cable (max. 2m)
10.2 Pin allocation of balance output bushing:
Front view:
5 1
9 6
Pin 2: Transmit data
Pin 3: Receive data
Pin 5: Signal ground