User manual

PBS-A03/A04-BA-e-1213 11
4.2 Input „Density measuring liquid“
 Press
TARE /
, the density saved as last of the
measuring liquid is displayed. When changing by
the arrow keys, enter first the numeric value of
the density considering the current temperature
(see chap. 7), then set the decimal place.
Use
UNIT
to increase the numeric value of the
flashing cipher.
Use
PRINT
to move the number selection to the
right, the respective active position flashes.
 Set decimal place
Take the last place using
PRINT
, when this place
dot is flashing, press
PRINT
anew . The decimal
place represented as „

“ appears.
Use
UNIT
to define the position of the decimal
place.
 Acknowledge with
TARE /
.
Observe that the stability mark is displayed, if
not, the entry has not been accepted.
 Press
ESC
ON/OFF
repeatedly or keep pressed for 3
sec until the gram display will appear.