User manual

69 PBS/PBJ-BA-e-1314
17.2 Data Formats
The following explanations refer to the case when the menu element 77 (EB type
format) is selected. Explanations concerning other formats are included in the data
of computers compatible with the suitable data formats.
Note:
The 󲐀 mark indicates the space code, and <Limiter> indicates the limiter code.
1. For measuring values:
First sign
Minus: '−' Not minus: space
from 2. to 11. sign:
Numerical values or „[”, ”]” are right justified. Position of the
decimal point is changed depending on the device type.
from 12. to 13. sign:
Units such as g󲐀 or kg
from 14. to 15. sign:
Limiter
Note:
• If the CR or LF command is the limiter (the menu element 94 or 95 is
selected), sign 13 is not available.
• When stability information is printed, the first of the above mentioned signs is
preceded with the following sign:
Stable time: S
Instable time: D
2. For „oL“ or „-oL“
„oL“ 󲐀󲐀󲐀󲐀󲐀 OL 󲐀󲐀󲐀󲐀󲐀 < Limiter >
„-oL“ − 󲐀󲐀󲐀󲐀 OL 󲐀󲐀󲐀󲐀󲐀 < Limiter >