User manual

PBS/PBJ-BA-e-1314 66

16.10 Automatic saving and zeroing

This function is used for weighing large number of single samples. If the function is

activated, the automatic saving and zeroing symbol is illuminated.

Select the menu element 52 in the menu overview.

• Place the container to be weighed on the balance and press the

TARE /

button when the automatic saving and zeroing function is in the stand-by

mode. (The automatic saving and zeroing symbol and mode

symbol are illuminated.)

The balance will be zeroed.

• Press the

button. The stand-by symbol disappears and measurements

within the automatic saving and zeroing function can be started.

• Place the first sample on the scale pan. Each time when the stabilisation

symbol is illuminated and the value corresponding to five times the zero range

or higher is illuminated or when the

button is pressed, the illuminating

value output and balance zeroing is carried out.

• Weighing process of the next sample is carried out without the necessity to

press the

ESC

ON/OFF

button.

• Press the

ESC

ON/OFF

button. The balance returns to the stand-by mode of the

automatic saving and zeroing function, the total weight placed on the scale

pan without the packaging weight is displayed. To print this value, press the

button.

Notes:

• If the stabilisation symbol is illuminated and the display value lies within the

zero range, zeroing is carried out automatically.

• Pressing the

button when the display value lies below five times the zero

range is followed by zeroing after data output. (Manual loading)

• Pressing the

ESC

ON/OFF

button when the automatic saving and zeroing function is in

stand-by mode is also followed by setting mains supply in stand-by mode.