User manual

53 PBS/PBJ-BA-e-1314

13 Functions for adaptation to ambient conditions

13.1 Stability and reaction (average value)

Exists the possibility to tune the stability of the display and the degree of reaction of

the balance to the requirements of certain applications or the installation

environment. There is a possibility of selection among five operating modes. Please

note that in general slowing down reaction times result in higher stability of the set

data handling, while speeding up reaction times have an influence on the stability

deterioration. However, the balances of PBS/PBJ type are designed to ensure both

properties i.e. fast reaction time and high stability.

13.1.1 Automatic mode

Select the menu element 22:

The balance automatically and dynamically undertakes to optimally determine the

average value during observation of load data. If there are not any special

circumstances, this setting should always be used.

13.1.2 Filling mode

Select the menu element 23:

This mode is suitable for weighing invariable liquid volumes. It is very susceptible to

wind and vibration.

(When the filling mode is active, the

MODE

button makes it possible to switch over

between 3 stability settings.)

13.1.3 Standard mode

Select the menu element 24:

This mode is suitable for weighing in normal environment. The determination of the

average value is fixed and is not subject to adaptation as in the automatic mode

which is performed dynamically.

13.1.4 Antivibration mode

Select the menu element 25:

This mode should be used if the balance is placed at a location where there are

strong vibrations, and its readings fluctuate in automatic mode.

The balance reaction is deteriorated in a result of small changes of weight.

13.1.5 Antiwind mode

Select the menu element 26:

This mode should be used if the balance is placed at a location where it is exposed

to air currents which cause fluctuations of its readings in automatic mode.

This reaction is deteriorated even more than in the antivibration mode, but the

weighing process is more stable.