User manual

15 PBS/PBJ-BA-e-1314

3.1.2 Setting the decimal point when entering numerical values

Entering a decimal point is necessary only for determining the specific gravity or if a

multiplier shall be defined for the user-defined unit.

• Repeat actuating the

button until the last digit flashes. Actuate the

button again in order to call up the decimal point setting mode. The reversed

triangle symbol ▼or the current decimal point flashes.

• Actuate the

UNIT

button in order to move the decimal point to the required

position by one digit each.

• Actuate the

TARE /

button to define the position of the decimal point. The

message „SEt“ which appears for a short period of time indicates that setting

has been completed.