User manual

63 PBS/PBJ-BA-e-1314

16.5 Auto Print function

(models with non-verifiable setting only)

Using the Auto Print function ensures automatic data printing without necessity to

press the

button for each single measurement. If the function is activated, the

(Auto-Print) symbol is displayed.

It is possible to select from six types of automatic printing. Information concerning

setting the zero range can be found in chapter 11.7

Printing whilst loading:

Select the menu element 42 in the menu overview.

Place or remove the sample when the displayed value lies within the zero range. The

data will be output automatically when the stabilisation symbol is illuminated and

the displayed positive value exceeds 5 times the zero range value. The next data

output will occur when the display is brought to the value within the zero range by

removing the sample or pressing the

TARE /

button.

Printing whilst loading and unloading:

Select the menu element 43 in the menu overview.

Place or remove the sample when the displayed value lies within the zero range. The

data will be output automatically when the stabilisation symbol is illuminated and

the displayed positive or negative value exceeds 5 times the zero range value. The

next data output will occur when the display is brought to the value within the zero

range by removing the sample or pressing the

TARE /

button.

Printing whilst loading and at zero:

Select the menu element 44 in the menu overview.

Place or remove the sample when the displayed value lies within the zero range. The

data will be output automatically when the stabilisation symbol is illuminated and

the displayed positive value exceeds 5 times the zero range value. Remove the

sample or press the

TARE /

button. The data will be output again when the displayed

value lies within the zero range and the stabilisation symbol is illuminated.

Printing whilst loading, unloading and at zero:

Select the menu element 45 in the menu overview.

Place or remove the sample when the displayed value lies within the zero range. The

data will be output automatically when the stabilisation symbol is illuminated and

the displayed positive or negative value exceeds 5 times the zero range value.

Remove the sample or press the

TARE /

button. The data will be output again when

the displayed value lies within the zero range and the stabilisation symbol is

illuminated.