User manual

41 PBS/PBJ-BA-e-1314
10 Basic Operation
10.1 Switch on off balance
Start-up:
1. After connection to the power supply the balance
displays . For switching on, press , the scale
carries out a segment test and starts automatically in
weighing mode.
2. If the scale is in standby mode, press . The scale is
ready for service immediately without heating up time.
Switching off:
1. Press ; the balance changes into standby mode,
that means that the balance is now in state ready-for-
operation..
2. To switch-off the balance completely, separate balance
from power supply.
If [WAIT] or [SET] are displayed, do not separate the balance from power
supply.
10.1 Zeroing
 Unload the balance
 Press , the zero display appears.