Data Sheet

MULTI
Pictograms
Suspended weighing:
Load support with hook on the underside
of the balance.
Hold function:
When the weighing conditions are unstable,
a stable weight is calculated as an average
value.
Pallet shipment:
The time required for internal shipping
preparations is shown in days in the
pictogram.
Stainless steel:
The balance is protected against corrosion
Verification possible:
The time required for verification is
specified in the pictogram.
Hold function:
When patients do not stand, sit or lie
completely still, a stable weight is
calculated using an average weight.
Package shipment:
The time required for internal shipping
preparations is shown in days in the
pictogram.
Protection against dust and water
splashes IPxx: The type of protection is
shown in the pictogram
Battery operation:
Ready for battery operation. The battery
type is specified for each device
Push and Pull:
the measuring device can capture
tension and compression forces.
Integrated scale:
In the eyepiece
LED illumination:
Cold, energy saving and especially
long-life illumination
Statistics:
using the saved values, the device calculates
statistical data, such as average value, standard
deviation etc.
Mains adapter:
230V/50Hz in standard version for EU. On
request GB, AUS or USA version available.
Universal mains adapter:
with universal input and optional input
socket adapters for A
)
EU, GB;
C
)
EU, GB, CH, USA, AUS.
Binocular Microscope:
For the inspection with both eyes
Monocular Microscope:
For the inspection with one eye.
Data interface RS-232:
To connect the balance to a printer,
PC or network.
Fluorescence illumination for
compound microscopes:
With 3 W LED illumination and filter
GLP/ISO log:
With date and time.
Only with KERN printers.
Weighing principle: Strain gauges
Electrical resistor on an elastic deforming
body.
Abbe Condenser:
With high numerical aperture for the
concentration and the focusing of light
Bluetooth* data interface:
To transfer data from the balance to
a printer, PC or other peripherals.
Polarising unit:
To polarise the light
Totalising level A:
The weights of similar items can be added
together and the total can be printed out.
Rechargeable battery pack:
Rechargeable set
Battery operation rechargable
Prepared for a rechargable battery
operation
360° rotatable
micr
oscope head
Adjusting program CAL:
For quick setting up of the balance‘s
accuracy. External adjusting weight required.
Fluorescence illumination for
compound microscopes:
With 100 W mercury lamp and filter
PC Software:
to transfer the measurements from the
device to a PC.
Wireless data transfer:
between the weighing unit and the
evaluation unit using an integrated
radio module.
Power supply:
Integrated in balance. 230V/50Hz standard
EU. More standards e.g. GB, AUS or USA on
request.
Trinocular Microscope:
For the inspection with both eyes and the
additional option for the connection of a
camera
RS-485 data interface:
To connect the balance to a printer, PC or
other peripherals. Suitable for data transfer
over large distances. Network in bus topology
is possible
Phase contrast unit:
For a higher contrast
Darkfield condenser/unit:
For a higher contrast due to indirect
illumination
Piece counting:
Reference quantities selectable. Display
can be switched from piece to weight.
Peak hold function:
capturing a peak value within a
measuring process.
Halogen illumination:
For pictures bright and rich in contrast
Control outputs
(
optocoupler, digital I/O
)
:
To connect relays, signal lamps,
valves, etc.
Infinity system:
Infinity corrected optical system
Weighing units:
Can be switched to e.g. nonmetric units at
the touch of a key. Please refer to website
for more details.
Automatic temperature compesation:
For measurements between 10 °C
and 30 °C
Weighing with tolerance range:
(
Check weighing
)
Upper and lower limiting
can be programmed individually, e.g. for
sorting and dosing. The process is supported
by an audible or visual signal, see the
relevant model
Your KERN specialist dealer
* The Bluetooth
®
word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by KERN & SOHN GmbH
is under license. Other trademarks and trade names are those of their
respective owners.
MEDICAL SCALES
2018